Specifications
|
Image
|
Device
|
Interline Transfer SONY Super HAD CCD
|
|
Size
|
1/3 inch
|
|
Effective Pixels (HxV)
|
811 x 508 (NTSC); 795 x 596 (PAL)
|
|
Horizontal Resolution
|
480 TVL / 380 TVL
|
|
Min. scene Illumination
|
Color
|
0.15 Lux at F1.2 (30 IRE, SAGC) (CAM-52xxH)
0.2 Lux at F1.2 (30 IRE, AGC) (CAM-52xxS)
|
|
B/W
|
N/A
|
|
IR Sensitivity
|
N/A
|
|
Lens
|
Lens Mount
|
C / CS (with adaptor)
|
|
Synchronization
|
Sync. System
|
Internal
|
|
Day/Night Functions
|
Day/Night Switching
|
N/A
|
|
Functions
|
Motion Detection
|
Yes (3 windows)
|
|
Electronic Shutter
|
AES On: 1/60 ~ 1/100,000 sec. (NTSC); AES Off: 1/60 sec. (NTSC); AES On: 1/50 ~ 1/100,000 sec. (PAL); AES Off: 1/50 sec. (PAL)
|
|
BLC
|
On / Off (switchable)
|
|
AGC
|
On / Off (switchable)
|
|
White Balance
|
AWB / PWB (switchable)
|
|
Flickerless
|
On / Off (switchable)
|
|
Auto Iris Control
|
Video / DC (switchable)
|
|
S/N Ratio
|
S/N Ratio
|
Better than 50 dB (AGC off)
|
|
Video (Compression)
|
Compression
|
MPEG-4 ASP compliant
|
|
Picture Resolution
|
Full D1 (720 x 480 in NTSC, 720 x 576 in PAL); CIF (352 x 240 in NTSC, 352 x 288 in PAL); QCIF (160 x 112 in NTSC, 176 x 144 in PAL)
|
|
Bit Rate
|
28 K ~ 3 M bps
|
|
Image Frame Rate
|
30 fps at full D1 resolution (NTSC); 25 fps at full D1 resolution (PAL)
|
|
Multi-stream
|
Up to 4 configurable frame rate/bit rate streams for preview and recording
|
|
Video Output
|
Composite Output
|
CVBS, 1.0Vp-p with 75 �© loading, BNC connector
|
|
Audio Input
|
Compression
|
8 kHz, Mono, PCM
|
|
Built-in Microphone
|
Sensitivity : -44+/-5 dB (0 dB=1V/pa, 1 kHz); S/N Ratio : more than 58 dB; Directivity : omnidirectional
|
|
Alarm
|
Input
|
1, TTL, terminal block
|
|
Output
|
1, TTL, terminal block
|
|
External I/O
|
Reset Button
|
Reset button
|
|
LED
|
System status
|
|
Network
|
LAN Port
|
Ethernet(10/100Base-T), RJ-45 connector
|
|
WAN Port
|
Ethernet(10/100Base-T), RJ-45 connector
|
|
Protocol
|
TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP, FTP, SMTP
|
|
Software
|
Web Browser
|
Microsoft Internet Explorer 6.0 or above
|
|
SDK
|
ActiveX control, C SDK
|
|
Security
|
Password Protection : configured by the administrator
|
|
Operating
|
Temperature
|
5 �C ~ 50 �C (40 �F ~ 122 �F)
|
|
Power
|
Power Requirement
|
DC 12 V +/-10% (CAM-5200)
PoE (IEEE802.3af) with Class 3 (CAM-5201)
AC 24 V +/-10% (CAM-5202)
|
|
Power Consumption
|
9 W
|
|
Physical
|
Dimensions (WxHxD)
|
63 mm x 52 mm x 120 mm (2.48' x 2.05' x 4.76')
|
|
Weight
|
450
|
Note: 802.3s working distance is 100 meters. PoE cameras are 802.3af Class 3 rated and can guarantee to receive power from 6.96 ~ 12.96 Watts. 100 meters is guaranteed if the cameras are connected to 802.3af Class 3 rated PoE injector, mid-span or network switch. If you need to extend the run above 100 meters, what you need to do is to use a normal network switch first and add one every 100 meters; use a PoE network switch finally within 100 meters of the IP cameras.
